CD Stud Welder , Insulation Pin Welder for Weld Pins , CD Pins ,
Bimetal Pins
This new line of Microprocessor controlled Capacitor Discharge stud
welding equipments incorporates the latest solid state technology
into a compact and rugged CD Stud Welder This unit has the capacity to weld studs ranging from 3 mm through
8 mm (10 mm) full flanged studs and pins (including cupped head
pins) The CD Stud Welder , Insulation Pin Welder for Weld Pins , CD Pins
, Bimetal Pinsmeets the highest requirements due to operating convenience,
precise process times, optimal functional reliability, lightweight
and easily portable, compact design, absolute safety (Safety
Shutdown) and Low cost The monitoring of all functions is clearly displayed by LED on the
front panel Thermostatically controlled cooling fan in all models for increased
efficiency
|
Unit | NOMARK 65 | NOMARK 99 | NOMARK 132 |
Welding range | M 3 - M 8 | M 3 - M 8 (M 10) | M 3 - M 10 |
Weldable Materials | Steel, Stainless Steel | Steel, Stainless Steel | Steel, Stainless Steel |
Welding process | "Contact" | "Contact" | "Contact" |
Capacitance | 66.000 µF | 99.000 µF | 132.000 µF |
Charging | 50-200 V (Dial‐down) | 50-200 V (Dial‐down) | 40-200 V (Dial‐down) |
Digital Voltmeter | Yes | Yes | Yes |
Duty cycle | up till 10 studs/min | up till 10 studs/min | up till 5 studs/min |
Energy | 1.320 Ws | 1.980 Ws | 2.640 Ws |
Mains supply | 230 V - 50/60 Hz - 10 AT | 230 V - 50/60 Hz - 10 AT | 230 V - 50/60 Hz - 10 AT |
Size (w x h x l) | 165 x 250 x 380 mm | 165 x 250 x 380 mm | 165 x 250 x 380 mm |
Weight | 12,5 Kg | 13 Kg | 14,5 Kg |
CD Stud Welder , Insulation Pin Welder for Weld Pins , CD Pins ,
Bimetal Pins packing details:
CD Stud Welder , Insulation Pin Welder for Weld Pins , CD Pins ,
Bimetal Pins advantage:
1.Wide range of application - the wide range of application to say
all need to install the fixed place, all the heat preservation
cotton can be used, especially in building installation industry.
2.Reduce process - reduce process is welding heat preservation
nails, because of the surface of the washroom so without any
requirements, cleanness of depriving the cleaning process.
3.Save time - the welder saving time every minutes up to 20
insulation nails, welding and edge pavement thermal insulation
cotton edge welding fixed, unlike adhesive meet insulation nail
need clotting.
4.Save material -- can be used to save material, such already save
the coil heat preservation cotton, can decrease again use quantity
of heat preservation nails.
5.Sturdy and reliable - the sturdy and reliable, welding is complete
preservation once nail never fall off naturally, thus effectively
guarantees the construction quality.
6.No shape limitation - in no shape limit of any shape the welding
process, the hair dryers can ensure construction quality,
especially in circular on general construction condition to reflect
more incomparable advantage.
7.No season limit -- insulation without season was restricted by
welding construction temperature limits, the construction site in
winter and any temperature of welding process, will not affect the
quality of welding.
8.Safety construction - the safety construction is taken edge shop
because the one-time installation is complete edge fixed the
construction method, so reduce the construction personnel aloft
working time and times, make construction safer.
9.No pollution - without pollution during construction and
construction is finished, this process will not produce any
pollution, more in line with the requirements of the modern world.
10.In another development, the second-ranking machine can also be
used as a repair tools for bonding insulation, nail because
adhesive rickety and peels part the repairs.
