Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail
Welding Machines
We can be your country standard to custome the power,we accept
small order an supply door to door services
Welding process- Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail
Welding Machines
1) the shape of the stud can be various shapes of use value,
according to the required length standard straight stud (with screw
Lines, with
no thread), the diameter range between M3 and M4, in addition to
the threaded fasteners, you can also use the circle The threaded
stud,
most of the stud with a flange, extension. stud material low carbon
steel materials stud demanding a copper plating surface treatment,
facilitate conductive
2) requirements conform to the requirements of the weld ability of
work piece, the surface can't have rust and paint, should be
properly cleaned,
or dirt will clip in Weld, the effect of weld strength.
Welding machine operation procedures and matters needing attention
welding preparation
(1) insert the earth wire electrode holder, control line, quick
connectors welding machine control panel connection port;
(2) insert the power input line welding power input port, and open
the power control switch;
Remark: this equipment is a low frequency, do not and argon arc
welding machine and other high frequency equipment sharing power
Mouth,
mouth, and make using the equipment with more distance.
(3) check whether the indicator light is open;
(4) the voltage regulation knob to turn check whether can normal
working voltage charging and discharging;
(5) the adjustment of the charging voltage
Before plug-in power charging voltage adjustment knob shall be
transferred to the smaller values, and then switched on.Slowly
clockwise rotation
Adjust knob, and watch the charging voltage meter, adjust until the
required working voltage, after working voltage is set,After each
welding welding
machine can automatically recharge to the set value.
Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail
Welding Machines-technical parameter
| Item | Content |
| Model | Insulation nails welder |
| Welding current output | Capacitor discharge |
| Capacitance specifications(μF) | 66,000 |
| Welding speed (times / min) | 15—20 |
| Operating voltage(V) | 30—198V |
| Input supply voltage(V) | 220 |
| Power frequency(Hz) | 50---60 |
| Welding thickness range(mm) | 0.5—5mm |
| Welding Diameter(mm) | 1.5—3 |
| Dimensions (mm) | 430×350×155 |
| Weight(Kg) | 31 |
| Configuration torch | Sucker torch |
accessories-Insulation Fastener Stud Welder , 3mm Diameter
Insulation Nail Welding Machines
| | |
Anti-spatter Stud gun with cable | | |
| | |
Earth clamp with earth lead | | |
| | |
| | |
