Flat Head Flanged Capacitor Discharge (CD) Stud Welder Studs, No Thread

Introduction & Specifications

1) Capacitor Discharge weld stud pins are designed to be welded to thin gauge sheet material

using tip ignition according to the capacitors discharge welding process.

2) Capacitor Discharge weld stud pins are available in many different sizes, from a pin diameter

of a 3 mm to 10mm.

3) Standard material are: Low Carbon Copper Flashed Steel, Stainless Steel, Aluminum Alloy,

and Brass.

4) Other grades, i.e. AISI 316 (A4), AISI 310 are available on request.

5) The flange is designed according to EN ISO 13918.

6) Pins made of steel 4.8 are protected against corrosion by copper coating.

(Thickness : 3 to 5 µm)

	D	A	B	L	Material
	3mm	4.5-5.3mm	0.9mm	6mm 8mm 10mm 12mm 16mm 20mm 25mm 30mm 40mm 50mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass
	4mm	5.5-6.3mm	0.9mm	6mm 8mm 10mm 12mm 16mm 20mm 25mm 30mm 35mm 40mm 50mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass
	5mm	7.5-8.3mm	0.9mm	6mm 8mm 10mm 12mm 16mm 20mm 25mm 30mm 35mm 40mm 50mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass
	6mm	8.5-9.3mm	0.9mm	10mm 12mm 16mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 60mm 70mm 75mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass
	8mm	9.5-10.3mm	1.0mm	10mm 12mm 16mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 60mm 70mm 75mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass
	10mm	11.3-12.3mm	1.0mm	10mm 12mm 16mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 60mm 70mm 75mm	Copper Coated Steel, Stainless Steel, Aluminum Alloy, and Brass

MATERIAL	MILD STEEL	STAINLESS STEEL	ALUMINUM	BRASS
	C - 0.23% max. P - 0.04% max. Mn - 0.90% max. S - 0.05% max.	AISI Grade: 302/304/305 Standard Other grades are available.	Alloy 1100 & 5000 Series Other alloys available upon request	Alloy (lead free) 70 - 30 std. Other alloys available upon request
MECHANICAL PROPERTIES	Tensile- 60,000 psi (min.) Yield - 50,000 psi (min.)	Tensile - 85,000 psi (min.) Yield - 40,000 psi (min.)	Tensile- 42,000 psi (min.) 5000 series Yield - 30,000 psi (min.) 5000 series	Tensile - 70,000 psi (min.) Yield - 50,000 psi (min.)
PLATING	Copper plating is standard	Does not apply to Stainless
ANNEALING	Studs are annealed where required	Studs are annealed where required

Detailed Image Of The Flanged No Thread Capacitor Discharge (CD) Weld Studs

Stainless Steel CD Weld Studs With Flat Head	Copper Plated Mild Steel CD Weld Studs With Flat Head

Package And Delivery

Packing:

50pcs per cases,

6 small cases in a box,

48 boxes on a pallet.

Delivery:

Sample or small order;DHL/EMS/UPS/TNT/EXPRESS
Large Order:we recommand you by SEA ,or by AIR if in an emergency.

Related Welder Stud Pins Products

High Hardness Aluminum Bi-metal CD Welder Pins	Stainless Steel Bi-metallic CD Weld Pins With Aluminum Base
Copper Plated Mild Steel Conical Tip CD Weld Pins	Aluminum Power Tip CD Weld Pins
Zinc Coated Mild Steel Power Base CD Weld Pins	Stainless Steel Capacitor Discharge(CD) Welding Pins
Aluminum Capacitor Discharge(CD) Welding Pins	Copper Coated Steel Capacitor Discharge(CD) Welding Pins

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition